SAE AMS5355E
Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated.
Standard:
AKA:
- AMS5355
- Revision: E
- 1944-11-01
- Historical. Access the latest revision: AMS5355J
- Ams F Corrosion Heat Resistant Alloys Committee
This specification covers a corrosion resistant steel in the form of investment castings.These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 °F (316 °C), but usage is not limited to such applications (See 8.3).Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 °F (538 °C).
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS5355J | 2009-10-23 | Latest | |
| AMS5355G | 2001-05-01 | Historical | |
| AMS5355H | 2001-04-30 | Historical | |
| AMS5355F | 1995-10-01 | Historical | |
| AMS5355D | 1991-10-01 | Historical | |
| AMS5355C | 1977-01-01 | Historical | |
| AMS5355B | 1969-11-01 | Historical | |
| AMS5355A | 1960-06-30 | Historical | |
| AMS5355 | 1955-03-01 | Historical | |
| AMS5355E | 1944-11-01 | Historical |
- SAE AMS 5355
- Aerospace
- Metallurgy
- Metals
- Steel
- Materials properties