Table of Contents
1Scope
2Background
3References
4Definitionsandabbreviations
4.1Definitions
4.2Abbreviations
5Referenceconfiguration
6CharacteristicsofthePhysicalMediumDependent
(PMD)sublayer
6.1PMDcharacteristicsatSBfor51840kbit/s
6.1.1Bitrates
6.1.2Bitratesymmetry
6.1.3BitErrorRatio(BER)
6.1.4Timing
6.1.5Mediumcharacteristics
6.1.6Transmitterfunctionality
6.1.7PMDScrambler/Descrambler
6.1.8Receivercharacteristics
6.1.9ConnectorsforCategory3UTPcabling
7FunctionsprovidedbytheTransmissionConvergence
(TC)sublayer
7.1Transfercapability
7.2Transport-specificTCfunctions
7.2.1SDH-based
7.2.2Cell-based
7.3ATMspecificTCfunctions
7.4OAMprocedures
7.4.1SDH-basedOAM
7.4.2Cell-basedOAM
8Powerfeeding Abstract
Describes Physical Layer characteristics for transporting of Asynchronous Transfer Mode (ATM) cells at a nominal bit rate of 51,840 kbit/s over category Unshielded Twisted Pair (UTP) cabling at the S[B] reference point of the B-ISDN User Network Interface (UNI), where the maximum distance is around 100 m. Can be used with existing building wiring.
