SAE AMS6348D
Steel, Bars, 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130), Normalized.
Standard:
AKA:
- AMS6348
- Revision: D
- 2013-10-10
- Ams E Carbon And Low Alloy Steels Committee
This specification covers an aircraft-quality, low-alloy steel in the form of bars. These bars have been used typically for parts, 0.50 inch (12.7 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 35 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS6348D | 2013-10-10 | Latest | |
| AMS6348C | 2004-05-03 | Historical | |
| AMS6348B | 1994-05-01 | Historical | |
| AMS6348A | 1988-10-01 | Historical | |
| AMS6348 | 1979-10-15 | Historical |
- SAE AMS 6348
- Aerospace
- Metallurgy
- Ferrous metals and alloys
- Steel
- Materials properties
- Ferrous metals